Cohc

EM18U-02

INSPECTION

HINT:

This check is used only to determine whether or not the idle CO/ HC complies with regulations.

1. INITIAL CONDITIONS

(a) Engine coolant at normal operating temperature.

(b) Air cleaner installed.

(c) All pipes and hoses of air induction system connected.

(d) All accessories switched OFF.

(e) All vacuum lines properly connected. HINT:

All vacuum hoses for EGR systems, etc. should be properly connected.

(f) SFI system wiring connectors fully plugged.

(g) Ignition timing set correctly.

(h) Transmission in neutral position.

(i) CO/HC meter calibrated by hand.

2. START ENGINE

3. RACE ENGINE AT 2,500 RPM FOR APPROX. 180 SECONDS

4. INSERT CO/HC METER TESTING PROBE AT LEAST 40 cm (1.3 ft) INTO TAILPIPE DURING IDLING

5. IMMEDIATELY CHECK CO/HC CONCENTRATION AT IDLE AND/OR 2,500 RPM

HINT:

When doing the 2 mode (2,500 rpm and idle) test, follow the measurement order prescribed by the applicable local regulations.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment