Connect Hoses

(a) Connect the brake booster vacuum hose.

(b) Connect the MAP sensor hose.

(c) Connect the heater hoses.

Y P20291

20. CONNECT FUEL HOSE

Connect the fuel inlet hose with the union bolt and 2 new gaskets.

Torque: 29 Nm (300 kgfcm, 22 ftlbf)

21. CONNECT ACCELERATOR CABLE, AND ADJUST IT

22. INSTALL RADIATOR (See page CO-22 )

23. INSTALL AIR CLEANER ASSEMBLY WITH AIR INTAKE CONNECTOR

24. FILL WITH TRANSAXLE OIL (FLUID)

25. FILL WITH ENGINE COOLANT

26. INSTALL ENGINE UNDER COVERS

27. INSTALL HOOD

28. START ENGINE AND CHECK FOR LEAKS

29. PERFORM ENGINE ADJUSTMENT

30. PERFORM ROAD TEST

Check for abnormal noise, shock, slippage, correct shift points and smooth operation.

31. RECHECK ENGINE COOLANT AND ENGINE OIL LEVELS

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment