Disassembly

1. INSPECT 3RD AND 4TH GEARS THRUST CLEARANCE

Using a feeler gauge, measure the thrust clearance. Standard clearance:

Maximum clearance:

2. INSPECT 3RD AND 4TH GEARS RADIAL CLEARANCE

Using a dial indicator, measure the radial clearance between the gear and shaft.

Standard clearance: 0.015 - 0.058 mm (0.0006 - 0.0023 in.) Maximum clearance: 0.070 mm (0.0028 in.) If the clearance exceeds the maximum, replace the gear, needle roller bearing or shaft.

3. REMOVE SNAP RING

Using 2 screwdrivers and a hammer, remove the snap ring.

4. REMOVE REAR BALL BEARING, 4TH GEAR, NEEDLE ROLLER BEARING, SPACER AND SYNCHRONIZER RING FROM INPUT SHAFT

(a) Using SST, a socket wrench (C141 only) and press, remove the rear ball bearing.

SST 09950-00020

(b) Remove the 4th gear, needle roller bearings, spacer and synchronizer ring.

5. REMOVE SNAP RING

Using 2 screwdrivers and a hammer, remove the snap ring.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment