Disconnect Throttle Cable From Engine

Disconnect the cable from the throttle linkage.

REMOVE PARK/NEUTRAL POSITION SWITCH

Disconnect the transaxle control cable from the transaxle control shaft lever.

Torque: 12 Nm (120 kgfcm, 9 ftlbf)

Remove the nut and transaxle control shaft lever.

Torque: 13 Nm (130 kgfcm, 9 ftlbf)

Using a screwdriver, pry off the nut stopper.

Remove the nut and nut stopper.

Remove the 2 bolts and park/neutral position switch.

REMOVE VALVE BODY (See page AX-12 )

REMOVE THROTTLE CABLE

Remove the retaining bolt and plate.

Pull out the cable from the transaxle case.

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment