(a) Remove the passenger's seat.
(b) Take out the console box side of the floor carpet.
(c) Disconnect the oxygen sensor connector.
(d) Using an ohmmeter, measure the resistance between the terminals +B and HT.
Resistance: 11 - 16 Q at 20°C (68°F) If the resistance is not as specified, replace the sensor. Torque: 44 Nm (440 kgfcm, 32 ftlbf)
(e) Reconnect the oxygen sensor connectors.
(f) Reinstall the floor carpet.
(g) Reinstall the passenger's seat.
Was this article helpful?