(a) Connect the positive (+) lead from the battery to terminal 3.
(b) Connect the negative (-) lead from the battery to terminals 7 and 11.
(c) Check that the bulb lights and the chime sounds for 4 -8 seconds.
(d) Return to step (a), and operate the chime again.
(e) Connect the positive (+) lead from the battery to terminal 9.
(f) Check that the chime stops sounding. HINT:
Check the chime within a period of 4 to 8 seconds. If operation is not as specified, replace the relay. 10. INSPECT INTEGRATION RELAY CIRCUIT (See page BE-11)
Was this article helpful?