Inspection Procedure

Check voltage between terminal 1 of luggage compartment door key lock and unlock switch connector and body ground.

PREPARATION:

(a) Remove luggage compartment door trim.

(b) Turn ignition switch ON. CHECK:

Measure voltage between terminal 1 of luggage compartment door key lock and unlock switch connector and body ground, when the key is turned to the unlock side and not turned. OK:

Key operation

Turned to the unlock side

Not turned

Voltage

Battery positive voltage

Check and replace theft deterrent ECU.*1

2 Check luggage compartment door key lock and unlock switch.

PREPARATION:

Disconnect luggage compartment door key lock and unlock switch connector.

CHECK:

Check continuity between terminals 1 and 2, when the key is turned to the unlock side and not turned.

Key operation

Turned to unlock side

Not turned

Tester connection

Specified condition

Continuity

No continuity

Repair or replace luggage compartment door key lock and unlock switch.

3 Check harness and connector between theft deterrent ECU and switch, switch and body ground (See page IN-26 ).

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment