Install Injectors And Delivery Pipe

(a) Install a new grommet to the injector.

(b) Apply a light coat of gasoline to an O-ring, and install it to the injector.

(c) While turning the injector left and right, install it to the delivery pipe. Install the 4 injectors.

(d) Place the 2 spacers and 4 insulators in position on the cylinder head.

(e) Place the injectors together with the delivery pipe on the cylinder head.

(f) Check that the injectors rotate smoothly. HINT:

If the injectors do not rotate smoothly, the probable cause is incorrect installation of O-rings. Replace the O-rings.

(g) Position the injector connector upward.

(h) Install the 2 bolts.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment