Installation

1. ASSEMBLE ENGINE AND TRANSAXLE M/T: (See page MX-4 )

A132L A/T: (See page AX-26) A242L A/T: (See page AX-30)

2. INSTALL STARTER

Toyota Tercel Starter Bolts

INSTALL TORQUE CONVERTER CLUTCH MOUNTING BOLTS

First, install the gray bolt and then 5 bolts. Tighten the bolts evenly. Torque: 27 Nm (280 kgfcm, 20 ftlbf) Install the engine rear end plate hole cover.

INSTALL A/C COMPRESSOR MOUNTING BRACKET

Install the compressor mounting bracket with the 4 bolts. Torque: 27 Nm (280 kgfcm, 20 ftlbf)

INSTALL PS PUMP ADJUSTING STRUT

Install the PS pump adjusting strut with the 2 bolts. Torque: 21 Nm (210 kgfcm, 15 ftlbf)

INSTALL ENGINE AND TRANSAXLE ASSEMBLY IN VEHICLE

Attach the engine sling device to the engine hangers. Lower the engine into the engine compartment. Tilt the transaxle downward, lower the engine and clear the LH engine mounting. NOTICE:

Be careful not to hit the PS gear housing, park/neutral position switch and throttle position switch.

(d) Keep the engine level, and align RH and LH engine mountings with the body bracket.

(e) Attach the RH engine mounting insulator to the mounting bracket and body, and temporarily install the through bolt, 2 bolts and nut.

(f) Install the LH engine mounting bracket to the transaxle and mounting insulator with the 5 bolts. Torque the bolts. Torque:

Bracket to transaxle (bolt head: NT) 65 Nm (650 kgfcm, 47 ftlbf) Bracket to insulator (bolt head: 7T) 49 Nm (490 kgfcm, 35 ftlbf)

(g) Connect the ground strap with the bolt. Torque: 49 Nm (490 kgfcm, 35 ftlbf)

Toyota Sienna Engine Mount Brackets

(h) Install and torque the rear engine mounting insulator through bolt.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Responses

  • MONIKA
    How to stall torque converter in Toyota tercel?
    7 years ago

Post a comment