KPa kgfcm psi or more

If pressure is not as specified, check the fuel pump, pressure regulator and/or injector.

(t) After checking fuel pressure, disconnect the negative (-) terminal cable from the battery and carefully remove the SST to prevent gasoline from splashing. SST 09268-45012 (u) Connect the fuel inlet hose to the fuel filter with 2 new gaskets and the union bolt.

Torque: 29 Nm (290 kgfcm, 22 ftlbf) (v) Check for fuel leakage (See page MF-1).

3. REMOVE REAR SEAT CUSHION

4. DISCONNECT FUEL PUMP AND SENDER GAUGE CONNECTOR

Tercel Fuel Pump Regulator Psi

5. INSPECT FUEL PUMP RESISTANCE

Using an ohmmeter, measure the resistance between terminals 2 and 6.

If the resistance is not as specified, replace the fuel pump.

6. INSPECT FUEL PUMP OPERATION

Connect the positive (+) lead from the battery to terminal 2 of the connector, and the negative (-) lead to terminal 6. Check that the fuel pump operates. NOTICE:

• These tests must be performed quickly (within 10 seconds) to prevent the coil from burning out.

• Keep the fuel pump as far away from the battery as possible.

• Always perform switching at the battery side.

If operation is not as specified, replace the fuel pump or lead wire.

7. RECONNECT FUEL PUMP AND SENDER GAUGE CONNECTOR

8. REINSTALL REAR SEAT CUSHION

SF0WS-04

COMPONENTS SF0WS-04

SF0WS-04

COMPONENTS SF0WS-04

Toyota Celica 2001 Fuel Sender Removal
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Responses

  • luca
    How to take rear seat out of a 96 toyota tercel?
    7 years ago
  • URSULA
    How to replace a 2000 toyota 4runner fuel pump?
    7 years ago
  • FIKRU
    How to replace fuel pump in 1996 toyota camry?
    7 years ago

Post a comment