Part No or equivalent

(v) Place the No.1 bearing cap in its proper location. When doing this, check that there is no gap between the cylinder head and the contact surface of bearing cap. (w) Temporarily tighten the bearing cap bolts, alternately tightening the left and right bolts uniformly.

(x) Install and uniformly tighten the 10 bearing cap bolts, in several passes, in the sequence shown. Torque: 13 Nm (130 kgfcm, 9 ftlbf)

Turn the camshaft 1 revolution and check that the timing marks of the camshaft gears are aligned. CHECK AND ADJUST VALVE CLEARANCE (See page EM-4)

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook

Post a comment