Removal

1. REMOVE BATTERY

2. REMOVE HOOD

3. REMOVE ENGINE UNDER COVERS

4. DRAIN ENGINE COOLANT

5. DRAIN TRANSAXLE OIL (FLUID)

6. REMOVE AIR CLEANER ASSEMBLY WITH AIR IN

TAKE CONNECTOR

7. REMOVE RADIATOR (See page CO-16 )

8. DISCONNECT ACCELERATOR CABLE

10. REMOVE CHARCOAL CANISTER

(a) Disconnect the canister hoses.

(b) Remove the charcoal canister.

11. DISCONNECT HOSES

(a) Disconnect the brake booster vacuum hose.

(b) Disconnect the MAP sensor hose.

(c) Disconnect the heater hoses.

12. DISCONNECT SPEEDOMETER CABLE FROM TRANSAXLE

DISCONNECT IDLE-UP AIR HOSES FROM AIR CONTROL VALVE

14. DISCONNECT ENGINE WIRE HARNESS

Disconnect these connectors and wires:

• Main heated oxygen sensor connector

• Oil pressure switch connector

• Engine coolant temperature sender gauge connector

• Engine coolant temperature sensor connector

• Camshaft position sensor connector

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment