Removal

1. REMOVE AIR CLEANER ASSEMBLY

2. DISCONNECT LEVEL WARNING SWITCH CONNECTOR

3. DRAW OUT FLUID WITH SYRINGE NOTICE:

Do not let brake fluid remain on a painted surface. Wash it off immediately.

4. DISCONNECT BRAKE LINES

Using SST, disconnect the brake lines from the master cylinder. SST 09751-3601 1 Torque: 15 Nm (155 kgfcm, 11 ftlbf)

BR5041

5. REMOVE MASTER CYLINDER

Remove the 2 mounting nuts, clamp and pull out the master cylinder and gasket. Torque: 13 Nm (130 kgfcm, 9 ftlbf)

Remove the 2 mounting nuts, 2-way and pull out the master cylinder and gasket.

Torque: 13 Nm (130 kgfcm, 9 ftlbf)

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment