(a) Disconnect the No.1 cooling fan connector.
Disconnect the No.2 cooling fan connector.
(c) Disconnect the radiator upper hose from the radiator.
(d) Disconnect the radiator lower hose from the water inlet.
(e) Disconnect the 2 A/T oil cooler hoses from the radiator. HINT:
Plug the hose to prevent oil from escaping.
(f) Remove the 2 bolts and 2 upper radiator supports. Torque: 12 Nm (120 kgfcm, 9 ftlbf)
After installation, check that the rubber cushion (A) of the support is not depressed.
(g) Remove the radiator assembly.
(h) Remove the 2 radiator lower supports and the lower radiator hose.
REMOVE NO.2 COOLING FAN FROM RADIATOR
Remove the 3 bolts and cooling fan.
6. REMOVE NO.1 COOLING FAN FROM RADIATOR
Remove the 2 bolts and cooling fan.
COOLING - RADIATOR_
Was this article helpful?