Replace Crankshaft Rear Oil Seal

HINT:

There are 2 methods to replace the oil seal which are as follows:

If rear oil retainer is removed from cylinder block

(a) Using a screwdriver and hammer, tap out the oil seal.

(b) Using SST and a hammer, tap in a new oil seal until its surface is flush with the rear oil seal edge.

SST 09223-15030, 09550-10012 (09552-10010)

(c) Apply MP grease to the oil seal lip.

Toyota Tercel Seal Crank

If rear oil seal retainer is installed to cylinder block

(d) Using a knife, cut off the oil seal lip.

(e) Using a screwdriver, pry out the oil seal. NOTICE:

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Responses

  • leardo
    How to change crankshaft oil seal 1997 toyota trecel?
    3 years ago

Post a comment