1. Tool bag
2. Jack handle
3. Spare tire
You will find a wheel nut wrench in the tool bag.
To prepare yourself foran emergency, you should familiarize yourself with the use of the jack, each of the tools and their storage locations.
To remove the jack, move the driver seat to the front-most position and remove the cover.
To remove: Turn the joint in direction 1 by hand until the jack is free.
To store: Turn the joint in direction 2 by hand until the jack is firmly secured to prevent it flying forward during a collision or sudden braking.
To remove the spare tire, loosen the bolt and remove it.
When storing the spare tire, put it in place with the inner side of the wheel facing up. Then secure the tire by repeating the above removal steps in reverse order to prevent it from flying forward during a collision or sudden braking.
—Blocking the wheel
2. Block the wheel diagonally opposite the flat tire to keep the vehicle from rolling when it is jacked up.
When blocking the wheel, place a wheel block in front of one of the front wheels or behind one of the rear wheels.
Was this article helpful?