Install Instrument Panel Finish Panel Subassembly Lower

Plate Toyota Yaris

(b) Engage the 7 claws and install the instrument panel finish panel lower.

16. INSTALL CONSOLE BOX ASSEMBLY REAR

(a) Engage the 2 clips and install the console box rear.

17. INSTALL CONSOLE BOX CARPET

(a) Install the console box carpet.

18. INSTALL CONSOLE BOX REAR COVER

(a) Engage the 8 claws and install the console box rear cover.

19. INSTALL SHIFTING HOLE COVER SUB-ASSEMBLY (for Manual Transaxle)

(a) Engage the 6 claws and install the shifting hole cover.

20. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

(a) Install the shift lever knob.

21. INSTALL COWL SIDE TRIM BOARD RH (See page IR-81)

22. INSTALL COWL SIDE TRIM BOARD LH (See page IR-81)

23. INSTALL INSTRUMENT PANEL UNDER COVER SUBASSEMBLY LH (See page IR-82)

24. INSTALL INSTRUMENT PANEL UNDER COVER SUBASSEMBLY RH (See page IR-81)

25. INSTALL FRONT DOOR SCUFF PLATE RH (See page IR-82)

26. INSTALL FRONT DOOR SCUFF PLATE LH (See page IR-82)

27. INSTALL UPPER INSTRUMENT PANEL SUBASSEMBLY (See page IP-29)

28. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (See page IP-32)

29. INSTALL NO. 1 SWITCH HOLE BASE (See page IP-32)

30. INSTALL FRONT PILLAR GARNISH RH (See page IR-

31. INSTALL FRONT PILLAR GARNISH LH (See page IR-

32. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH (See page IR-81)

33. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH (See page IR-81)

34. CONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY (See page AC-257)

35. CONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY (See page AC-257)

36. CONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY (See page AC-257)

37. INSTALL AIR CONDITIONER PANEL SUB-ASSEMBLY (See page AC-257)

38. INSTALL RADIO TUNER OPENING COVER (w/o Radio Receiver) (See page AC-150)

39. INSTALL RADIO RECEIVER ASSEMBLY (See page AV-46)

40. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER (See page AC-258)

41. INSTALL COMBINATION METER ASSEMBLY (See page ME-148)

42. INSTALL INSTRUMENT CLUSTER FINISH PANEL (See page ME-148)

43. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (See page ME-149)

44. INSTALL INSTRUMENT PANEL FINISH PANEL END LH (See page ME-149)

45. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

46. CHECK SRS WARNING LIGHT

RS-31

REAR CONSOLE BOX (for Sedan) COMPONENTS

B132385E01

CONSOLE COMPARTMENT DOOR CUSHION

CONSOLE COMPARTMENT DOOR CUSHION

CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY

CONSOLE COMPARTMENT DOOR CUSHION

CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY

REAR CONSOLE BOX

CONSOLE REAR END PANEL SUB-ASSEMBLY

CONSOLE COMPARTMENT DOOR CUSHION

CONSOLE REAR END PANEL SUB-ASSEMBLY

CONSOLE BOX CUP HOLDER

B132345E01

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER (See page ME-138)

3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

(a) Remove the shift lever knob.

Removable Lower Pane Fixed Upper

4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

(a) Shift the shift lever into the N position.

(b) Disengage the 5 clips and the claw and remove the upper console panel.

5. REMOVE CONSOLE UPPER REAR PANEL SUBASSEMBLY

(a) Disengage the 3 clips and 3 claws.

(b) Disconnect the connector and remove the console upper rear panel.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment