Install Rear Door Opening Trim Weatherstrip Lh

HINT:

Use the same procedure as for the RH side.

Install Power Rear Door

38. INSTALL REAR DOOR SCUFF PLATE RH

(a) Engage the 7 claws and install the rear door scuff plate.

39. INSTALL REAR DOOR SCUFF PLATE LH

HINT:

Use the same procedure as for the RH side.

Toyota Yaris WeatherstripToyota Yaris Weatherstrip

40. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

(a) Align the location mark with the paint mark first, and install the front door opening trim weatherstrip, as shown in the illustration. Paint mark

Area

Color

RH side

Blue

LH side

Pink

41. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

HINT:

Use the same procedure as for the RH side.

42. INSTALL COWL SIDE TRIM BOARD RH

(a) Engage the stud bolt and the claw and install the cowl side trim board.

43. INSTALL COWL SIDE TRIM BOARD LH

HINT:

Use the same procedure as for the RH side.

Under Door Trim

44. INSTALL INSTRUMENT PANEL UNDER COVER SUBASSEMBLY RH

(a) Engage the 4 claws and install the instrument panel under cover.

45. INSTALL INSTRUMENT PANEL UNDER COVER SUBASSEMBLY LH

(a) Engage the 3 claws and install the instrument panel under cover.

(b) Tighten the 2 screws.

46. INSTALL FRONT DOOR SCUFF PLATE RH

(a) Engage the 11 claws and install the front door scuff plate.

47. INSTALL FRONT DOOR SCUFF PLATE LH

HINT:

Use the same procedure as for the RH side.

48. INSTALL LUGGAGE COMPARTMENT TRIM INNER PAD (for 60/40 Split Seat Type) (See page ED-136)

49. INSTALL SPARE WHEEL COVER ASSEMBLY (for 60/ 40 Split Seat Type) (See page ED-137)

50. INSTALL LUGGAGE COMPARTMENT FLOOR MAT (for 60/40 Split Seat Type) (See page ED-137)

51. INSTALL REAR SEATBACK ASSEMBLY RH (for 60/ 40 Split Seat Type) (See page SE-65)

52. INSTALL REAR SEATBACK ASSEMBLY LH (for 60/40 Split Seat Type) (See page SE-52)

53. INSTALL REAR SEATBACK ASSEMBLY (for Fixed Seat Type) (See page SE-108)

Seat Cover For Asamble Manual

54. INSTALL REAR SEAT CUSHION COVER PAD SUBASSEMBLY

(a) for 60/40 Split Seat Type:

(1) Install the rear seat cushion cover pad subassembly (See page SE-53).

(b) for Fixed Seat Type:

(1) Install the rear seat cushion cover pad subassembly (See page SE-109).

55. INSTALL FRONT SEAT ASSEMBLY LH (See page SE-20)

56. INSTALL FRONT SEAT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.

57. INSTALL FRONT SEAT HEADREST ASSEMBLY

HINT:

Use the same procedure for both sides. (a) Push in the lock button of the front seat headrest support and install the front seat headrest.

58. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

59. INSPECT SRS WARNING LIGHT

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Responses

  • Reijo
    How to install seat covers in yaris rear seat?
    8 years ago

Post a comment