Install Roof Headlining Assembly

(a) Pull the roof headlining back into the vehicle through the back door.

(b) w/ Curtain Shield Airbag:

(1) Engage the 4 hooks and install the roof headlining.

(2) Install the clip.

(c) w/o Curtain Shield Airbag:

(1) Engage the 2 claws and the 4 hooks and install the roof headlining.

(2) Install the clip.

(g) Connect the connector.

(h) Install the wiring harness clamp.

11. INSTALL INSTRUMENT PANEL BOX (See page IP-78)

12. INSTALL UPPER INSTRUMENT PANEL SUBASSEMBLY (See page IP-29)

13. INSTALL NO. 1 SWITCH HOLE BASE (See page IP-32)

14. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (See page IP-32)

15. INSTALL COMBINATION METER ASSEMBLY (See page ME-148)

16. INSTALL INSTRUMENT CLUSTER FINISH PANEL (See page ME-148)

17. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (See page ME-149)

18. INSTALL INSTRUMENT PANEL FINISH PANEL END LH (See page ME-149)

19. INSTALL FRONT PILLAR GARNISH RH

(a) w/ Curtain Shield Airbag:

(1) Remove the piece of cloth or nylon.

(b) Install the 3 antenna cord clamps.

(c) Connect the connector.

(d) w/ Curtain Shield Airbag:

(1) Install a new special clip and the clip onto a new front pillar garnish.

(2) Engage the 2 clips and the 2 claws and install the front pillar garnish.

(e) w/o Curtain Shield Airbag:

(1) Engage the 2 clips and the 2 claws and install the front pillar garnish.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment