Install Seat Belt Anchor Cover

HINT:

Use the same procedure for both sides. (a) Engage the 3 claws and install the seat belt anchor cover cap.

Cap Front Seat Belt Inner Anchor

/ /

1 ^ \ ^

H \ /

glf

T

B114500

INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

(a) Engage the 3 clips and the 3 claws and install the deck trim side panel.

(b) Tighten the 3 screws.

INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

(a) Connect the deck side room light connector.

(b) Engage the 3 clips and the 3 claws and install the deck trim side panel.

(c) Tighten the 3 screws.

53. INSTALL REAR SEAT OUTER BELT ASSEMBLY RH

(a) Engage the clip and install the anchor plate.

(b) Tighten the bolt.

54. INSTALL REAR SEAT OUTER BELT ASSEMBLY LH

HINT:

Use the same procedure as for the RH side.

55. INSTALL REAR DECK TRIM COVER (See page IR-82)

Toyota Corolla Rear Seat Belt Anchor

56. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

(a) Engage the 8 clips, the retainer and the 10 claws and install the front quarter trim panel.

(b) Install the belt of the rear seat outer belt onto the rear seat shoulder belt hanger.

57. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

HINT:

Use the same procedure as for the RH side.

Camry Pillar Trim Retainer

58. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

(a) Align the location mark with the paint mark first, and install the front door opening trim weatherstrip, as shown in the illustration. Paint mark:

Area

Color

RH side

Yellow

LH side

White

59. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

HINT:

Use the same procedure as for the RH side.

60. INSTALL COWL SIDE TRIM BOARD RH (See page IR-81)

61. INSTALL COWL SIDE TRIM BOARD LH (See page IR-81)

62. INSTALL INSTRUMENT PANEL UNDER COVER SUBASSEMBLY RH (See page IR-81)

63. INSTALL INSTRUMENT PANEL UNDER COVER SUBASSEMBLY LH (See page IR-82)

Toyota Yaris With Yellow Candy Paint

64. INSTALL FRONT DOOR SCUFF PLATE RH

(a) Engage the 8 claws and install the front door scuff plate.

65. INSTALL FRONT DOOR SCUFF PLATE LH

HINT:

Use the same procedure as for the RH side.

66. INSTALL REAR SEAT ASSEMBLY RH (for 60/40 Split Seat Type) (See page SE-102)

67. INSTALL REAR SEAT ASSEMBLY LH (for 60/40 Split Seat Type) (See page SE-84)

68. INSTALL NO. 1 REAR SEAT LEG COVER (for 60/40 Split Seat Type)

(1) Install the No. 1 rear seat leg cover (See page SE-103).

(1) Install the No. 1 rear seat leg cover (See page SE-85).

69. INSTALL NO. 2 REAR SEAT LEG COVER (for 60/40 Split Seat Type) (See page SE-85)

70. INSTALL REAR SEATBACK ASSEMBLY (for Hold Down Seat Type) (See page SE-122)

71. INSTALL REAR SEAT CUSHION COVER PAD SUBASSEMBLY (for Hold Down Seat Type) (See page SE-123)

72. INSTALL DECK FLOOR BOX RH (See page IR-83)

73. INSTALL DECK FLOOR BOX LH (See page IR-83)

74. INSTALL DECK BOARD SUB-ASSEMBLY (See page IR-83)

75. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (See page IR-83)

76. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

77. INSPECT SRS WARNING LIGHT

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment