Ip

(d) Install the upper instrument panel with the 2 <C> bolts and the 2 <B> screws.

Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf) for bolt <C>

(e) Connect the passenger airbag connector and clamp.

10. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

(a) Engage the claws of the hinge portions by pushing the glove compartment door in the horizontal direction to install the glove compartment door assembly. NOTICE:

Engage the claw by pushing it in the horizontal direction, otherwise, installation failure caused by excessive play around the hinge portion will result.

(b) Slightly flex the upper portion of the glove compartment door assembly to engage the stopper.

(c) Install the 2 glove compartment door stoppers onto the glove compartment door.

11. INSTALL FRONT PILLAR GARNISH RH (See page IR-

12. INSTALL FRONT PILLAR GARNISH LH (See page IR-

13. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

(a) Install the front door opening trim weatherstrip.

14. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

(a) Install the front door opening trim weatherstrip.

15. INSTALL COMBINATION METER ASSEMBLY (See page ME-140)

16. INSTALL INSTRUMENT CLUSTER FINISH PANEL (See page ME-140)

17. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (See page ME-141)

18. INSTALL INSTRUMENT PANEL FINISH PANEL END LH (See page ME-141)

19. INSTALL INSTRUMENT PANEL FINISH PANEL LOWER CENTER (See page ME-142)

20. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

21. CHECK SRS WARNING LIGHT

UPPER INSTRUMENT PANEL (for Hatchback)

PRECAUTION

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment