Oil Maintenance Indicator Resetting Procedure Usa only

Oil Maintenance Indicator

Condition

Specified State

Blinks

Vehicle has run 4,500 miles since previous setting

Indicator blinks for 15 seconds after ignition switch is turned ON (including 3 seconds for a valve check)

Illuminates

Vehicle has run 5,000 miles since previous setting

Indicator illuminates after ignition switch is turned ON.

(a) Set the window display located inside the combination meter to the Trip A indication.

(b) Turn the ignition switch OFF.

(c) While pressing the ODO/TRIP display change switch (reset switch) (for at least 5 seconds), turn the ignition switch ON.

(d) When the reset procedure has been completed successfully, the MAINT REQD indicator light turns off and the ODO/TRIP meter indicates 0 (zero) and then returns to its regular display.

HINT:

If the reset fails, the MAINT REQD indicator light remains illuminated. Perform the procedure again.

U0100

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment