Read Data List

Total OBD & ECU Auto Diagnostics

TOAD OBD Scanner

Get Instant Access

HINT:

Using the intelligent tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

(a) Connect the intelligent tester to the DLC3.

(b) Turn the ignition switch ON.

(c) Read the Data List according to the prompts displayed on the tester.

METER

Item

Measurement Item/Display (Range)

Normal Condition

Diagnostic Note

+B VOLTAGE

Battery voltage Min=0, Max=255, 1LSB=1

10V: 119 / 10.5V: 126 / 11V: 132 / 12V: 145 / 13V: 157 / 14V: 170

-

ODO/TRIP SW

ODO/TRIP change switch/ ON or OFF

ON: Switch is pushed OFF: Switch is released

-

TAIL CANCEL SW

Taillight cancel switch/ ON or OFF

ON: Taillight cancel switch is ON OFF: Taillight cancel switch is OFF

-

TAIL RELAY SW

Taillight relay switch/ ON or OFF

ON: Taillight relay switch is ON OFF: Taillight relay switch is OFF

-

P-BELT BUCKL SW

Front passenger seat belt buckle switch/ ON or OFF

ON: Front passenger seat belt is fastened OFF: Front passenger seat belt is unfastened

-

Item

Measurement Item/Display (Range)

Normal Condition

Diagnostic Note

TIMER SW METER

Timer switch on combination meter/ ON or OFF

ON: Timer switch is ON OFF: Timer switch is OFF

-

SPEED METER

Vehicle speed / Min.: 0 km/ h(0mph),Max.: 255km/h(158mph)

Approximately same as actual vehicle speed (When vehicle is driven)

-

TACHO METER

Engine speed / Min.: 0 rpm, Max.: 12,750 rpm

Approximately same as actual engine speed (When engine is running)

-

COOLANT TEMP

Engine coolant temperature / Min.: 0°C, Max.: 127.5°C

After warming up: 75 to 105°C(167 to 221 °F)

-

Fuel receiver gauge segments No.1 to No.8 illuminate: 14 to 34 No.1 to No.6 (No.7) illuminate:

FUEL GAUGE (A/D)

Fuel input signal / Min.: 0, Max.: 255

77 to 109 No.1 to No.4 (No,5) illuminate: 135 to 172 No.1 and No.2 illuminate: 175 to 188 No.1 flashes: 194 to 200

OIL MAINTENANCE(*1)

Integrated value for Oil Maintenance / Min.: 0 mile, Max.: 25500 mile

Total accumulated vehicle travel distance for oil maintenance since last reset

-

RHEOSTAT (A/D)

Rheostat value / Min.: 0, Max.: 255

Light control rheostat switch is Dark(0)^Bright(255)

-

HINT:

Performing the intelligent tester's Active Test allows relays, VSV, actuators and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to save time. The Data List can be displayed during the Active Test.

(a) Connect the intelligent tester to the DLC3.

(b) Turn the ignition switch ON.

(c) Perform the Active Test according to the prompts displayed on the tester.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment