Read Value Of Data List Pig Supply

Total OBD & ECU Auto Diagnostics

TOAD OBD Scanner

Get Instant Access

(a) Connect the intelligent tester to the DLC3.

(b) Select the item [PIG SUPPLY] in the DATA LIST and read the value displayed on the intelligent tester.

Standard voltage: Always 11 to 14 V

CHECK INTERMITTENT PROBLEMS

INSPECT FUSE (EPS FUSE)

Engine Room R/B:

EPS fuse

(a) Remove the EPS fuse from the engine room R/B.

(b) Measure the resistance of the fuse. Standard resistance:

Below 1Q

INSPECT SHORT CIRCUIT IN COMPONENTS AND WIRES CONNECTED TO FUSE

CHECK HARNESS AND CONNECTOR (POWER STEERING ECU - BODY GROUND)

Kessel Staufix Fka Einbauanleitung

(a) Disconnect the connector from the power steering ECU.

(b) Measure the voltage and the resistance. Standard

Tester Connection

Condition

Specified Condition

PIG (A19-1) - Body ground

Always

11 to 14 V

PGND (A19-2) - Body ground

Always

Below 1 Q

REPAIR OR REPLACE HARNESS OR CONNECTOR

INSPECT STEERING COLUMN ASSEMBLY (POWER STEERING MOTOR)

(a) Disconnect the connector from the power steering ECU.

(b) Measure the resistance. Standard resistance

Tester Connection

Condition

Specified Condition

M1 (b1-1) - M2 (b1-2)

Always

0.08 to 0.15 n

M1 (b1-1) - Body ground

Always

1 Mn or higher

M2 (b1-2) - Body ground

Always

1 Mn or higher

REPLACE STEERING COLUMN ASSEMBLY

REPLACE STEERING COLUMN ASSEMBLY

REPLACE POWER STEERING ECU

DTC

C1581/81

Assist Map Un-Writing

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment