Reassembly

1. INSTALL OIL PUMP RELIEF VALVE

(a) Coat the oil pump relief valve with engine oil and insert the oil pump relief valve and oil pump relief valve spring into the oil pump cover.

(b) Install the oil pump relief valve plug. Torque: 25 N*m (255 kgf*cm, 18 ft.*lbf)

2. INSTALL OIL PUMP ROTOR SET

(a) Coat the oil pump rotor set with engine oil and place it into the oil pump body with the marks facing the oil pump cover side.

3. INSTALL OIL PUMP COVER

(a) Install the oil pump cover with the 2 bolts and 3 screws.

Torque: 8.8 N*m (90 kgf*cm, 78 in.*lbf) for bolt 10 N*m (105 kgf*cm, 7.6 ft.*lbf) for screw

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment