Removal

NOTICE:

Always use "Torx" socket wrench E10 when removing the rear seat.

1. REMOVE REAR SEAT CUSHION COVER PAD (for Hold Down Seat Type) (See page SE-114)

2. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (for 60/40 Split Seat Type) (See page IR-48)

3. REMOVE DECK BOARD SUB-ASSEMBLY (for 60/40 Split Seat Type) (See page IR-48)

4. REMOVE DECK FLOOR BOX (for 60/40 Split Seat Type) (See page SE-70)

5. REMOVE NO. 1 REAR SEAT LEG COVER (for 60/40 Split Seat Type) (See page SE-70)

6. REMOVE NO. 2 REAR SEAT LEG COVER (for 60/40 Split Seat Type) (See page SE-70)

7. REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type) (See page SE-71)

8. REMOVE REAR FLOOR SERVICE HOLE COVER (See page FU-26)

9. DISCHARGE FUEL SYSTEM PRESSURE (See page FU-26)

10. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

11. DISCONNECT FUEL TANK MAIN TUBE SUBASSEMBLY (See page FU-27)

12. DISCONNECT FUEL TANK VENT HOSE SUBASSEMBLY (See page FU-27)

13. REMOVE FUEL PUMP GAUGE RETAINER (See page FU-27)

14. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (See page FU-27)

15. REMOVE FUEL SENDER GAUGE ASSEMBLY

(a) Disconnect the fuel sender gauge connector.

F(Upper End)

F(Upper End)

(b) Unlock the fuel sender gauge, and slide and remove it.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Responses

  • natsnet
    How to remove rear split seat yaris 2006?
    8 years ago

Post a comment