Remove Instrument Panel Cup Holder Subassembly Rh

(a) Remove the 3 <A> screws and the instrument panel box.

45. REMOVE GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY

(a) Disengage the claw and remove the glove compartment door stopper.

46. REMOVE OUTER MIRROR SWITCH ASSEMBLY

(a) Disengage the 2 claws and remove the outer mirror switch.

47. REMOVE LIGHT CONTROL RHEOSTAT

(a) Disengage the 2 claws and remove the light control rheostat.

Adapter Assy Stereo Jack 86190 12020Adapter Assy Stereo Jack FrysAdapter Assy Stereo Jack Frys Instrument Panel Cup Holder Toyota

48. REMOVE STEREO JACK ADAPTER ASSEMBLY

(a) Disengage the 2 claws and remove the stereo jack adapter.

Disconnect Glove Box Stopper String

49. REMOVE INSTRUMENT CLUSTER FINISH PANEL SEAL

(a) Disengage the 5 claws and remove the panel seal.

Instrument Panel Yaris

50. REMOVE INSTRUMENT PANEL NO. 1 SAFETY PAD

(a) Remove the safety pad.

51. REMOVE INSTRUMENT PANEL NO. 2 SAFETY PAD

(a) Remove the safety pad.

INSTALLATION

1. INSTALL INSTRUMENT PANEL NO. 1 SAFETY PAD

(a) Apply butyl tape to install the instrument panel safety pad No. 1 onto the instrument panel lower (When installing a new one). Adhesive:

Part No. 08850-00065, Butyl Tape Set or the equivalent

Adapter Assy Stereo Jack 86190 12020Adapter Assy Stereo Jack 86190 12020

2. INSTALL INSTRUMENT PANEL NO. 2 SAFETY PAD

(a) Apply butyl tape to install the instrument panel safety pad No. 2 onto the instrument panel lower (When installing a new one).

Adhesive:

Part No. 08850-00065, Butyl Tape Set or the equivalent

3. INSTALL INSTRUMENT CLUSTER FINISH PANEL SEAL

(a) Engage the 5 claws and install the panel seal.

Adapter Assy Stereo Jack

4. INSTALL STEREO JACK ADAPTER ASSEMBLY

(a) Engage the 2 claws and install the stereo jack adapter.

Adapter Assy Stereo Jack 86190 12020

5. INSTALL LIGHT CONTROL RHEOSTAT

(a) Engage the 2 claws and install the light control rheostat.

6. INSTALL OUTER MIRROR SWITCH ASSEMBLY

(a) Engage the 2 claws and install the outer mirror switch.

7. INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY

(a) Engage the claw and install the glove compartment door stopper.

TSSF1

p Ml

J-J-r

B132343

8. INSTALL INSTRUMENT PANEL CUP HOLDER SUBASSEMBLY LH

(a) Install the instrument panel cup holder with the 3 <A> screws.

9. INSTALL INSTRUMENT PANEL CUP HOLDER SUBASSEMBLY RH

(a) Install the instrument panel cup holder with the 3 <A> screws.

10. INSTALL LOWER INSTRUMENT PANEL SUBASSEMBLY

(a) Using a nipper, cut off both ends of the runner portion shown in the illustration (When installing a new one).

(b) Install the lower instrument panel with the 6 <D> bolts, 2 <E> bolts, screw <G> and screw <H>. NOTICE:

Do not excessively tighten the <D> bolts, as this may damage the area not being tightened.

(c) Connect the clamps and connectors.

1991 Toyota Pickup Dash Panel Manual

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Responses

  • shishay
    How to dash mr2 removal?
    7 years ago
  • Leon
    How to remove dashboard of mazda pickup?
    7 years ago

Post a comment