Remove Seat Belt Anchor Cover

HINT:

Use the same procedure for both sides.

(a) Pull portion A, shown in the illustration, toward you, remove the 2 claws on the lower side followed by the claw on the upper side. Then remove the seat belt anchor cover cap.

33. REMOVE FRONT SEAT OUTER BELT ASSEMBLY RH

(a) Remove the bolt and the through anchor.

34. REMOVE FRONT SEAT OUTER BELT ASSEMBLY LH

HINT:

Use the same procedure as for the RH side.

35. REMOVE CENTER PILLAR LOWER GARNISH RH

(a) Disengage the 2 clips and the 2 claws and remove the center pillar lower garnish.

36. REMOVE CENTER PILLAR LOWER GARNISH LH

HINT:

Use the same procedure as for the RH side.

Center Pillar UpperCenter Pillar Upper

37. REMOVE CENTER PILLAR UPPER GARNISH RH

(a) Disengage the 3 clips and the 2 hooks and remove the center pillar upper garnish.

38. REMOVE CENTER PILLAR UPPER GARNISH LH

HINT:

Use the same procedure as for the RH side.

39. REMOVE SEAT BELT ANCHOR COVER (See page SB-159)

40. REMOVE ROOF HEADLINING SERVICE HOLE COVER (w/o Curtain Shield Airbag)

HINT:

Use the same procedure to remove all the roof headlining service hole covers. (a) Using a clip remover with its tip wrapped in protective tape, remove the 6 roof headlining service hole covers.

41. REMOVE ASSIST GRIP COVER

HINT:

The fitting number of the assist grip covers varies with the specifications.

(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the assist grip cover.

Tyaris Car Seat Anchor

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Responses

  • zahra
    How to remove yaris seat belt anchor?
    8 years ago

Post a comment