Abbreviations Used In This Manual

For convenience, the following abbreviations are used in this

manual.

ABS

Antilock Brake System

A/C

Air Conditioner

assy

assembly

ECT

Electronic Controlled Transmission

ECU

Electronic Control Unit

e.g.

Exempli Gratia (for Example)

Ex.

Except

FWD

Front Wheel Drive Vehicles

2WD

Two Wheel Drive Vehicles

4WD

Four Wheel Drive Vehicles

in.

inch

LH

Left-hand

LHD

Left-hand Drive

MIG

Metal Inert Gas

M/Y

Model Year

PPS

Progressive Power Steering

RH

Right-hand

RHD

Right-hand Drive

SRS

Supplemental Restraint System

SSM

Special Service Materials

w/

with

w/o

without

RADIATOR SUPPORT (ASSY)

REPLACEMENT

REMOVAL

Engine Classifications

POINT

F22816

INSTALLATION

^ Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram)

^ Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

^ After welding, apply polyurethane foam to the corresponding parts.

^ After welding, apply body sealer and undercoating to the corresponding parts.

^ After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

F22817

POINT

1 Inspect the fitting of the headlight, front fender, hood and other related parts, before welding as this affects the appearance of the finish.

Arca Noe Para Colorear

F22818

POINT

1 Measure the dimensions before installing the headlight.

2 These values are reference values.

530 mm (20.87 in.) 742 mm (29.21 in.) 944 mm (37.17 in.) 1,324 mm (52.13 in.)

INSTALLATION

^ Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram)

^ Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

^ After welding, apply polyurethane foam to the corresponding parts.

^ After welding, apply body sealer and undercoating to the corresponding parts.

^ After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

F22820

POINT

1 Inspect the fitting of the front fender and other related parts before welding as this affects the appearance of the finish.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment