Body Panel Under Coating Areas

HINT:

1) First wipe off any dirt, grease or oil with a rag soaked in silicone remover.

2) Cover the surrounding areas with masking paper to avoid coating unnecessary areas. If other areas are acci-dently coated, wipe off the coating immediately.

3) Apply the first coating of undercoat to all welded areas and panel joints, then apply a second coat over the entire area.

4) Do not coat parts which become hot such as the tailpipe, and moving parts such as the propeller shaft.

5) Apply under coating to all weld points under the body to ensure corrosion prevention at every location except the areas below.

6) Be sure to seal the edge of the flange of the member and bracket with undercoating.

7) Be sure to repair the under coating as necessary if there are signs of damage such as cracking or peeling.

8) Apply sealer before applying the under coat for rust prevention.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment