Cc

e124662e05

(b) Measure the resistance. Standard resistance

Tester Connection

Specified Condition

Terminal 3 (CCS) main switch side - CCS (D3-1)

Below 1 Q

Terminal 4 (ECC) main switch side - ECC (D3-2)

The spiral cable makes a maximum of approximately 5 rotations.

(c) Reinstall the spiral cable.

REPLACE SPIRAL CABLE

CHECK HARNESS AND CONNECTOR (SPIRAL CABLE - ECM AND BODY GROUND)

(a) Disconnect the A21 ECM connector.

(b) Disconnect the D3 spiral cable (vehicle side) connector.

(c) Measure the resistance. Standard resistance

Tester Connection

Specified Condition

A21-40 (CCS) - D3-1 (CCS)

Below 1 Q

A21-40 (CCS) or D3-1 (CCS) - Body ground

10 kQ or higher

D3-2 (ECC) - Body ground

Below 1 Q

(d) Reconnect the ECM connector.

(e) Reconnect the spiral cable (vehicle side) connector.

REPAIR OR REPLACE HARNESS OR CONNECTOR

REPLACE ECM

Cruise Main Indicator Light Circuit

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment