Center Body Pillar Cut Hatchback S Door

REPLACEMENT

REMOVAL

F2284C

INSTALLATION

^ Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram) ^ Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

^ After welding, apply the polyurethane foam to the corresponding parts. ^ After welding, apply body sealer and under-coating to the corresponding parts.

^ After applying the top coat layer, apply anti-rust agent to the inside of the necked section structural weld spots.

(10 mm x 7)

F22841

POINT

1 Before temporarily installing the new parts, weld [A], [B] and [C] with standard welding number. PART NAME

[A] Rocker Outer Reinforce [B] Center Body Pillar Reinforcement [C] Center Body Inner Pillar 10 mm (0.39 in.) 45 mm (1.77 in.) 80 mm (3.15 in.)

Yaris Hatchback

0-17

Y

6 Ifll.

L n

m\

X

1 w

1

In )B

0-17

POINT

1 Inspect the fitting of the front door, rear door and other related parts before welding as this affects the appearance of the finish.

2 After welding [A], [B] and [C] to the vehicle, install [D].

PART NAME

[A] Rocker Outer Reinforce [B] Center Body Pillar Reinforcement [C] Center Body Inner Pillar [D] Center Body Outer Pillar

F22842

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment