Disassembly

1. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY

(a) Disengage the 2 claws and remove the air duct.

2. REMOVE AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY

(a) Disengage the 3 claws and remove the air inlet damper control cable.

3. REMOVE BLOWER MOTOR

(a) Remove the 3 screws and the blower motor.

4. REMOVE BLOWER RESISTOR

(a) Remove the 2 screws and the blower resistor.

5. REMOVE AIR FILTER CASE

(a) Pinch portion A to disengage the claw and remove the air filter case.

6. REMOVE AIR REFINER ELEMENT

(a) Remove the air refiner element from the blower assembly.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment