Disassembly

1. REMOVE FRONT AXLE HUB HOLE SNAP RING

(a) Using snap ring pliers, remove the hole snap ring. NOTICE:

When removing the hole snap ring, do not damage the magnetic rotor surface.

Hub Sub Assy

2. REMOVE FRONT AXLE HUB SUB-ASSEMBLY

(a) Fix the steering knuckle in a vise between aluminum plates.

NOTICE:

Do not overtighten the vise.

(b) Using SST, remove the axle hub. SST 09520-00031

Sst 09520 00031 Axle Hub

(c) Using SST, remove the hub bearing inner race from the axle hub.

SST 09950-40011 (09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04011, 09957-04010, 09958-04011), 09950-60010 (09951-00370)

3. REMOVE FRONT DISC BRAKE DUST COVER

(a) Remove the dust cover by tapping the back side with a brass bar and hammer.

4. REMOVE FRONT AXLE HUB BEARING

(a) Install the removed hub bearing inner race onto the outer side of the hub bearing.

(b) Using SST and a press, remove the hub bearing from the steering knuckle.

SST 09223-15020, 09387-00041 (09387-02010), 09950-60010 (09951-00630), 09950-70010 (09951-07100)

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment