End

CHECK TRANSMITTER LED ILLUMINATION

(a) Check that the transmitter's LED illuminates 3 times when the switch is pressed 3 times. OK:

Transmitter's LED illuminates 3 times when switch is pressed 3 times.

Go to step 4

CHECK WIRELESS DOOR LOCK CONTROL FUNCTIONS (STANDARD OPERATION FUNCTION)

HINT:

Use the following standard test procedure to check the transmitter again.

(a) Hold the transmitter approximately 1 m (3.28 ft.) from the driver side door outside handle. The transmitter must be held parallel to the ground and perpendicular to the side of the vehicle.

(b) Press and hold either the LOCK or UNLOCK transmitter switch for 1 second, and check that the doors are locked or unlocked, accordingly.

Doors can be locked and unlocked with transmitter switches.

Go to step 5

REPLACE DOOR CONTROL TRANSMITTER MODULE

REPLACE TRANSMITTER BATTERY

(a) After replacing the transmitter battery, check that the doors can be locked and unlocked using the transmitter switches.

Doors can be locked and unlocked with transmitter.

REPLACE DOOR CONTROL TRANSMITTER MODULE

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment