Front Body Pillar Cut Hatchback

REPLACEMENT

With the cowl top side upper panel removed.

REMOVAL

1GG mm

8G mm

1GG mm

8G mm

16G mm

7G mm

16G mm

7G mm

POINT

1 *1: This part of the outer panel is reused because the rocker panel section is cut off at a position behind the service part cut position of the outer panel.

7G mm (2.76 in.) 8G mm (3.15 in.) 1GG mm (3.94 in.) 16G mm (6.3G in.)

F22836

INSTALLATION

^ Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram)

^ Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

^ After welding, apply polyurethane foam to the corresponding parts.

^ After welding, apply body sealer and undercoating to the corresponding parts.

^ After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

230 mm

230 mm

(10 mm x 3)

POINT

1 Before temporarily installing the new parts, weld [A], [B], [C] and [D] with standard welding number. PART NAME

[A] Rocker Outer Reinforce [B] Front Body Pillar Lower Reinforce [C] Front Body Inner Pillar [D] Front Body Outer Pillar 10 mm (0.39 in.) 15 mm (0.59 in.) 230 mm (9.06 in.)

F22838

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment