Inspect Rd Gear Synchronizer Ring

(a) Check for wear and damage.

(b) Coat the 3rd gear cone with gear oil.

(c) Turn the synchronizer ring in one direction while pushing it against the 3rd gear cone.

(d) Check that the ring locks.

If the synchronizer outer ring does not lock, replace the synchronizer ring.

How Measure Syncronizer Clearance

(e) Using a feeler gauge, measure the clearance between the synchronizer ring back and the gear spline end. Standard clearance:

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment