Inspect Synchronizer Ring No For Nd Gear

(a) Check for wear and damage.

(b) Coat the 2nd gear cone with gear oil.

(c) Turn the synchronizer ring in one direction while pushing it against the 2nd gear cone.

(d) Check that the ring locks.

If the synchronizer ring does not lock, replace the synchronizer ring.

(e) Using a feeler gauge, measure the clearance between the synchronizer ring back and the gear spline end. Standard clearance:

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook

Post a comment