Inspection Procedure

NOTICE:

• Turn the ignition switch OFF before measuring the resistances of the CAN main wire and the CAN branch wire.

• After the ignition switch is turned off, check that the key reminder warning system and light reminder warning system are not in operation.

Before measuring the resistance, leave the vehicle as is for at least 1 minute and do not operate the ignition switch, any other switches or the doors. If doors need to be opened in order to check connectors, open the doors and leave them open. HINT:

Operating the ignition switch, any switches or any doors triggers related ECU and sensor communication with the CAN, which causes resistance variation.

CHECK CAN BUS LINE FOR DISCONNECTION (CENTER AIRBAG SENSOR ASSEMBLY BRANCH WIRE)

Wire Harness Side:

Center Airbag Sensor Assembly Connector

CANH

CANH

CANL

(a) Turn the ignition switch OFF.

(b) Disconnect the D16 center airbag sensor assembly connector.

(c) Measure the resistance. Standard resistance

Tester Connection

Condition

Specified Condition

D16-13 (CANH) - D16-22 (CANL)

Ignition switch OFF

54 to 69 Q

REPAIR OR REPLACE CAN BRANCH WIRE CONNECTED TO CENTER AIRBAG SENSOR ASSEMBLY (CAN-H, CAN-L)

CHECK HARNESS AND CONNECTOR (IG2, E1, E2)

Wire Harness Side:

Center Airbag Sensor Assembly Connector

(a) Disconnect the D16 center airbag sensor assembly connector.

(b) Measure the resistance. Standard resistance

Tester Connection

Condition

Specified Condition

D16-25 (E1) - Body ground

Always

Below 1 Q

D16-26 (E2) - Body ground

Always

Below 1 Q

(c) Measure the voltage. Standard voltage

Tester Connection

Condition

Specified Condition

D16-21 (IG2) - Body ground

Ignition switch ON

11 to 14 V

REPAIR OR REPLACE HARNESS OR CONNECTOR

REPLACE CENTER AIRBAG SENSOR ASSEMBLY

CAN Bus Line

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment