Inspection Procedure

CHECK SPEAKER

(a) Check whether sound is emitted from each speaker.

Result

Result

Proceed to

Front No. 1 speakers have problems

A

Rear speakers have problems

Go to step 4

INSPECT FRONT NO. 1 SPEAKERS

(a) Check the left and right front No. 1 speakers (See page AV-163 or AV-159). OK:

Front No. 1 speakers are normal.

REPLACE FRONT NO. 1 SPEAKER

CHECK HARNESS AND CONNECTOR (RADIO RECEIVER - FRONT NO. 1 SPEAKER)

(a) Disconnect the D10 receiver connector.

(b) Disconnect the front No. 1 speaker connector.

(c) Measure the resistance. Standard resistance

Tester Connection

Specified Condition

D10-2 (FL+) - G6-1

Below 1 Q

D10-6 (FL-) - G6-2

Below 1 Q

D10-2 (FL+) - Body ground

10 kQ or higher

D10-6(FL-) - Body ground

10 kQ or higher

D10-1 (FR+) - F6-1

Below 1 Q

D10-5 (FR-) - F6-2

Below 1 Q

D10-1 (FR+) - Body ground

10 kQ or higher

D10-1 (FR+) - Body ground

10 kQ or higher

REPAIR OR REPLACE HARNESS OR CONNECTOR

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE

INSPECT REAR SPEAKERS

(a) Check the left and right rear speakers (See page AV-172, AV-177 or AV-183). OK:

Rear speakers are normal.

nGj>

REPLACE REAR SPEAKER

CHECK HARNESS AND CONNECTOR (RADIO RECEIVER - REAR SPEAKER)

(a) Disconnect the D11 receiver connector.

(b) Disconnect the rear speaker connectors.

(c) Measure the resistance.

Standard resistance (Hatchback 3-Door Models)

Tester Connection

Specified Condition

D11-2 (RL+) - J27-1

Below 1 Q

D11-6 (RL-) - J27-2

Below 1 Q

D11-1 (RR+) - J26-1

Below 1 Q

D11-3 (RR-) - J26-2

Below 1 Q

Standard resistance (Hatchback 5-Door Models)

Tester Connection

Specified Condition

D11-2 (RL+) - I4-1

Below 1 Q

D11-6 (RL-) - I4-2

Below 1 Q

D11-1 (RR+) - H4-1

Below 1 Q

D11-3 (RR-) - H4-2

Below 1 Q

Standard resistance (Sedan)

Tester Connection

Specified Condition

D11-2 (RL+) - J39-1

Below 1 Q

D11-6 (RL-) -J39-2

Below 1 Q

D11-1 (RR+) - J38-1

Below 1 Q

D11-3 (RR-) - J38-2

Below 1 Q

Standard resistance

Tester Connection

Specified Condition

D11-2 (RL+) - Body ground

10 kQ or higher

D11-6 (RL-) - Body ground

10 kQ or higher

D11-1 (RR+) - Body ground

10 kQ or higher

D11-3 (RR-) - Body ground

10 kQ or higher

nGj>

REPAIR OR REPLACE HARNESS OR CONNECTOR

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE

Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment