Install Brake Master Cylinder

(a) Install a new O-ring onto the brake master cylinder.

(1) Install the brake master cylinder with the 2 nuts. Torque: 13 N*m (127 kgf*cm, 9 ft.*lbf)

(1) Install the brake master cylinder and brake tube way with the 2 nuts. Torque: 13 N*m (127 kgf*cm, 9 ft.*lbf)

(d) Using SST, install the 2 brake tubes onto the brake master cylinder.

SST 09023-00100 Torque: for use without SST

for use with SST

HINT:

• Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).

• This torque value is effective when SST is parallel to a torque wrench.

(1) Using SST, install the 3 brake tubes to the brake tube way. SST 09023-00100 Torque: for use without SST

for use with SST

HINT:

• Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).

• This torque value is effective when SST is parallel to a torque wrench.

(f) Connect the brake fluid level warning switch connector.

3. CONNECT CLUTCH RESERVOIR TUBE (for Manual Transaxle)

(a) Connect the reservoir tube with the clip.

4. INSTALL BATTERY CARRIER (See page EM-145)

5. INSTALL BATTERY TRAY

6. INSTALL BATTERY (See page EM-148)

7. FILL RESERVOIR WITH BRAKE FLUID (See page BR-10)

8. BLEED MASTER CYLINDER (See page BR-10)

9. BLEED BRAKE LINE (See page BR-12)

10. CHECK FLUID LEVEL IN RESERVOIR (See page BR-12)

BRAKE - BRAKE MASTER CYLINDER BR-35

11. CHECK FOR BRAKE FLUID LEAKAGE

BRAKE BOOSTER COMPONENTS

for Hatchback:

Q— FRONT WIPER ARM HEAD CAP

FRONT WIPER ARM AND BLADE ASSEMBLY RH

Q— FRONT WIPER ARM HEAD CAP

FRONT WIPER ARM AND BLADE ASSEMBLY RH

Brake Master Cylinder Install

FRONT WIPER ARM HEAD CAP

COWL TOP VENTILATOR LOUVER LH

NO. 1 COWL TOP VENTILATOR LOUVER CENTER

COWL TO REGISTER DUCT SUB-ASSEMBLY

FRONT WIPER MOTOR AND LINK

FRONT WIPER ARM HEAD CAP

COWL TOP VENTILATOR LOUVER LH

NO. 1 COWL TOP VENTILATOR LOUVER CENTER

COWL TO REGISTER DUCT SUB-ASSEMBLY

FRONT WIPER MOTOR AND LINK

Cowl Ventilator

OUTER COWL TOP PANEL

OUTER COWL TOP PANEL

C116866E10

Mazda Brake Cylinder Pins GreasingBrake Master Cylinder Push Pin

for Sedan:

Grease Duct Reservoirs
3.5 (36, 31 in.*lbf)

BATTERY CLAMP SUB-ASSEMBLY

BATTERY CLAMP SUB-ASSEMBLY

-BATTERY

-BATTERY

Toyota Yaris Battery Assembly

BATTERY TRAY

BATTERY CARRIER

BATTERY TRAY

BATTERY CARRIER

C107526E05

Ring Master Link Installation
C116938E03
Brake Master Cylinder Toyota Avensis
/

for Manual Transaxle:

CLUTCH RESERVOIR TUBE

I Non-reusable part

Lithium soap base glycol grease * For use with SST

C116940E03

BRAKE VACUUM CHECK VALVE ASSEMBLY

VACUUM HOSE-

PUSH ROD PIN

VACUUM HOSE-

GROMMET

GROMMET

PUSH ROD PIN

Ring Master Link Installation

CLIP BRAKE PEDAL

RETURN SPRING

BRAKE BOOSTER

BRAKE MASTER CYLINDER PUSH ROD CLEVIS

CLIP BRAKE PEDAL

RETURN SPRING

BRAKE BOOSTER

Toyota Brake Master Cylinder Replacement

O-RING

BRAKE TUBE WAY

BRAKE MASTER CYLINDER

BRAKE TUBE WAY

O-RING

BRAKE MASTER CYLINDER

BRAKE TUBE ASSEMBLY

BRAKE TUBE ASSEMBLY

for Manual Transaxle:

CLUTCH RESERVOIR TUBE

# Non-reusable part

Lithium soap base glycol grease

* For use with SST

C121836E02

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment