Installation

1. INSTALL GENERATOR ASSEMBLY

(a) Provisionally install the generator with fixing bolt B.

(b) Provisionally install the fan belt adjusting slider with fan belt adjusting slider fixing bolts A and B, then move the generator toward the cylinder block and tighten bolt B.

(c) Install the connector and the wire harness clamp.

(d) Install terminal B with the nut.

(e) Install the terminal cap.

2. INSTALL FAN AND GENERATOR V BELT (See page EM-7)

3. ADJUST FAN AND GENERATOR V BELT (See page EM-7)

4. INSPECT FAN AND GENERATOR V BELT (See page EM-8)

5. INSTALL ENGINE UNDER COVER RH

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment