Installation

1. INSTALL CLUTCH SWITCH ASSEMBLY

(a) Fully loosen the lock nut of the clutch switch assembly.

(b) Adjust the clutch switch until the threaded portion comes into contact with the cushion. Tighten the lock nut and ensure that the threaded portion is in contact with the cushion.

(c) Connect the connector.

2. INSTALL INSTRUMENT PANEL UNDER COVER SUBASSEMBLY LH (See page IR-35)

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

POWER DOOR LOCK CONTROL SYSTEM PARTS LOCATION

HATCHBACK:

W/ POWER WINDOW:

DOOR CONTROL SWITCH (FOR FRONT DRIVER DOOR SIDE)

FRONT DOOR LOCK ASSEMBLY RH

- DOOR LOCK MOTOR

- DOOR LOCK AND UNLOCK SWITCH

W/O POWER WINDOW:

DOOR CONTROL SWITCH (FOR CENTER CONSOLE SIDE)

FRONT DOOR LOCK ASSEMBLY LH

- DOOR LOCK MOTOR

- DOOR LOCK AND UNLOCK SWITCH

REAR DOOR LOCK ASSEMBLY RH* - DOOR LOCK MOTOR

W/O POWER WINDOW:

DOOR CONTROL SWITCH (FOR CENTER CONSOLE SIDE)

REAR DOOR LOCK ASSEMBLY RH* - DOOR LOCK MOTOR

REAR DOOR LOCK ASSEMBLY LH* - DOOR LOCK MOTOR

BACK DOOR LOCK ACTUATOR ASSEMBLY

- DOOR LOCK MOTOR

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment