1. INSTALL THERMOSTAT
(a) Install a new gasket onto the thermostat.
(b) Install the thermostat with the jiggle valve facing upward.
The jiggle valve may be set within 10° on either side, as shown in the illustration.
2. INSTALL WATER INLET
(a) Install the water inlet with radiator hose with the 2 nuts.
3. ADD ENGINE COOLANT (See page CO-8)
4. CHECK FOR ENGINE COOLANT LEAKAGE (See page CO-1)
COOLING FAN RELAY ON-VEHICLE INSPECTION
1. INSPECT COOLING FAN RELAY NO. 2
Was this article helpful?