Installation

1. INSTALL BLOWER UNIT

(a) Install the blower unit with the 3 screws.

2. INSTALL INSTRUMENT PANEL REINFORCEMENT (See page AC-141)

3. INSTALL CONNECTOR NO. 2 HOLDER (See page AC-145)

4. INSTALL MAIN BODY ECU (See page AC-145)

5. INSTALL INSTRUMENT PANEL BRACE SUBASSEMBLY (See page AC-146)

6. INSTALL REAR NO. 3 AIR DUCT (for Cold Area Specification Vehicles) (See page AC-146)

7. INSTALL REAR NO. 1 AIR DUCT (for Cold Area Specification Vehicles) (See page AC-147)

8. INSTALL REAR NO. 2 AIR DUCT (for Cold Area Specification Vehicles) (See page AC-147)

9. INSTALL DEFROSTER NOZZLE ASSEMBLY (See page AC-147)

10. INSTALL STEERING COLUMN ASSEMBLY (See page SR-38)

11. INSTALL BRAKE PEDAL SUPPORT SUB-ASSEMBLY (for Manual Transaxle) (See page BR-21)

12. INSTALL BRAKE MASTER CYLINDER PUSH ROD CLEVIS (for Manual Transaxle) (See page BR-21)

13. INSTALL BRAKE PEDAL (for Automatic Transaxle) (See page SR-38)

14. INSTALL STEERING SLIDING YOKE SUBASSEMBLY (See page AC-148)

15. INSTALL COLUMN HOLE COVER SILENCER SHEET (See page SR-39)

16. INSTALL INSTRUMENT PANEL SUB REINFORCEMENT (See page SR-39)

17. CONNECT POWER STEERING ECU (See page SR-

18. INSTALL COMBINATION SWITCH ASSEMBLY (See page SR-40)

19. INSTALL STEERING COLUMN COVER (See page SR-

20. INSTALL STEERING WHEEL ASSEMBLY (See page SR-41)

21. INSTALL STEERING PAD (See page RS-310)

22. INSTALL LOWER INSTRUMENT PANEL SUBASSEMBLY (See page IP-75)

23. CONNECT HOOD LOCK CONTROL LEVER SUBASSEMBLY (See page IP-77)

24. CONNECT ANTENNA CORD SUB-ASSEMBLY (See page IP-77)

25. INSTALL NO. 6 HEATER TO REGISTER DUCT ASSEMBLY (See page IP-77)

26. INSTALL INSTRUMENT PANEL BOX (See page IP-78)

27. INSTALL INSTRUMENT PANEL FINISH PANEL SUBASSEMBLY LOWER (See page IP-78)

28. INSTALL CONSOLE BOX ASSEMBLY REAR (See page IP-79)

29. INSTALL CONSOLE BOX CARPET (See page IP-79)

30. INSTALL CONSOLE BOX REAR COVER (See page IP-79)

31. INSTALL SHIFTING HOLE COVER SUB-ASSEMBLY (for Manual Transaxle) (See page IP-79)

32. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) (See page IP-80)

33. INSTALL COWL SIDE TRIM BOARD RH (See page IR-81)

34. INSTALL COWL SIDE TRIM BOARD LH (See page IR-81)

35. INSTALL INSTRUMENT PANEL UNDER COVER SUBASSEMBLY LH (See page IR-82)

36. INSTALL INSTRUMENT PANEL UNDER COVER SUBASSEMBLY RH (See page IR-81)

37. INSTALL FRONT DOOR SCUFF PLATE RH (See page IR-82)

38. INSTALL FRONT DOOR SCUFF PLATE LH (See page IR-81)

39. INSTALL UPPER INSTRUMENT PANEL SUBASSEMBLY (See page IP-29)

40. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (See page IP-32)

41. INSTALL NO. 1 SWITCH HOLE BASE (See page IP-32)

42. INSTALL FRONT PILLAR GARNISH RH (See page IR-

43. INSTALL FRONT PILLAR GARNISH LH (See page IR-

44. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH (See page IR-81)

45. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH (See page IR-81)

46. CONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY (See page AC-257)

47. CONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY (See page AC-257)

48. CONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY (See page AC-257)

49. INSTALL AIR CONDITIONER PANEL SUBASSEMBLY (See page AC-257)

50. INSTALL RADIO TUNER OPENING COVER (w/o Radio Receiver) (See page AC-150)

51. INSTALL RADIO RECEIVER ASSEMBLY (See page AV-46)

52. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER (See page AC-258)

53. INSTALL COMBINATION METER ASSEMBLY (See page ME-148)

54. INSTALL INSTRUMENT CLUSTER FINISH PANEL (See page ME-148)

55. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (See page ME-149)

56. INSTALL INSTRUMENT PANEL FINISH PANEL END LH (See page ME-149)

57. CONNECT HEATER WATER INLET HOSE A (See page AC-150)

58. CONNECT HEATER WATER OUTLET HOSE A (FROM HEATER UNIT) (See page AC-150)

59. INSTALL LIQUID TUBE SUB-ASSEMBLY (See page AC-150)

60. INSTALL SUCTION TUBE SUB-ASSEMBLY (See page AC-150)

61. INSTALL COWL TOP PANEL OUTER (See page EM-146)

62. INSTALL NO. 2 COWL TO REGISTER DUCT SUB-ASSEMBLY (See page EM-147)

63. INSTALL FRONT WIPER MOTOR AND LINK (See page WW-21)

64. INSTALL COWL TOP VENTILATOR LOUVER LH (See page WW-21)

65. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY (See page WW-21)

66. INSTALL HOOD TO COWL TOP SEAL (See page WW-22)

67. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH (See page WW-22)

68. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH (See page WW-23)

69. INSTALL FRONT WIPER ARM HEAD CAP (See page WW-23)

70. ADD ENGINE COOLANT (See page CO-8)

71. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

72. CHECK SRS WARNING LIGHT

RS-31

73. CHARGE REFRIGERANT (See page AC-67)

74. WARM UP ENGINE (See page AC-69)

75. CHECK FOR ENGINE COOLANT LEAK (See page CO-1)

76. CHECK FOR REFRIGERANT LEAK (See page AC-69)

77. POSITION FRONT WHEELS FACING STRAIGHT AHEAD

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment