Installation

1. INSTALL BLOWER UNIT

(a) Install the blower unit with the 3 screws.

2. INSTALL INSTRUMENT PANEL REINFORCEMENT (See page AC-100)

3. INSTALL CONNECTOR NO. 2 HOLDER (See page AC-103)

4. INSTALL MAIN BODY ECU (DRIVER SIDE J/B) (See page AC-103)

5. INSTALL INSTRUMENT PANEL BRACE SUBASSEMBLY (See page AC-104)

6. INSTALL REAR NO. 3 AIR DUCT (for Cold Area Specification Vehicles) (See page AC-104)

7. INSTALL REAR NO. 1 AIR DUCT (for Cold Area Specification Vehicles) (See page AC-105)

8. INSTALL REAR NO. 2 AIR DUCT (for Cold Area Specification Vehicles) (See page AC-105)

9. INSTALL DEFROSTER NOZZLE ASSEMBLY (See page AC-105)

10. INSTALL HEATER TO REGISTER DUCT ASSEMBLY (See page AC-106)

11. INSTALL STEERING COLUMN ASSEMBLY (See page SR-19)

12. INSTALL BRAKE PEDAL SUPPORT SUB-ASSEMBLY (for Manual Transaxle) (See page BR-21)

13. INSTALL BRAKE MASTER CYLINDER PUSH ROD CLEVIS (for Manual Transaxle) (See page BR-21)

14. INSTALL BRAKE PEDAL (for Automatic Transaxle) (See page SR-19)

15. INSTALL STEERING SLIDING YOKE SUBASSEMBLY (See page AC-106)

16. INSTALL COLUMN HOLE COVER SILENCER SHEET (See page SR-20)

17. INSTALL INSTRUMENT PANEL SUB REINFORCEMENT (See page SR-20)

18. CONNECT POWER STEERING ECU (See page SR-21)

19. INSTALL COMBINATION SWITCH ASSEMBLY (See page SR-21)

20. INSTALL STEERING COLUMN COVER (See page SR-22)

21. INSTALL STEERING WHEEL ASSEMBLY (See page SR-22)

22. INSTALL STEERING PAD (See page RS-310)

23. INSTALL LOWER INSTRUMENT PANEL SUBASSEMBLY (See page IP-52)

24. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY (See page IP-53)

25. CONNECT ANTENNA CORD SUB-ASSEMBLY (See page IP-53)

26. INSTALL INSTRUMENT PANEL BOX (See page IP-53)

27. INSTALL INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY (See page IP-54)

28. INSTALL INSTRUMENT PAD LOWER RH (See page IP-54)

29. INSTALL INSTRUMENT PAD LOWER LH (See page IP-55)

30. INSTALL REAR CONSOLE BOX ASSEMBLY (See page IP-88)

31. INSTALL CONSOLE BOX CARPET (See page IP-88)

32. INSTALL CONSOLE UPPER REAR PANEL SUBASSEMBLY (See page IP-89)

33. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (See page IP-89)

34. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) (See page IP-89)

35. INSTALL COWL SIDE TRIM BOARD RH (See page IR-34)

36. INSTALL COWL SIDE TRIM BOARD LH (See page IR-34)

37. INSTALL INSTRUMENT PANEL UNDER COVER SUBASSEMBLY RH (See page IR-35)

38. INSTALL INSTRUMENT PANEL UNDER COVER SUBASSEMBLY LH (See page IR-35)

39. INSTALL FRONT DOOR SCUFF PLATE RH (See page IR-35)

40. INSTALL FRONT DOOR SCUFF PLATE LH (See page IR-35)

41. INSTALL UPPER INSTRUMENT PANEL SUBASSEMBLY (See page IP-11)

42. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (See page IP-13)

43. INSTALL FRONT PILLAR GARNISH RH (See page IR-

44. INSTALL FRONT PILLAR GARNISH LH (See page IR-

45. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH (See page IP-14)

46. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH (See page IP-14)

47. CONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY (See page AC-246)

48. CONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY (See page AC-246)

49. CONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY (See page AC-246)

50. INSTALL AIR CONDITIONING PANEL ASSEMBLY (See page AC-246)

51. INSTALL STEREO OPENING COVER (w/o Radio Receiver) (See page IP-56)

52. INSTALL RADIO RECEIVER ASSEMBLY (See page AV-40)

53. INSTALL INSTRUMENT CLUSTER FINISH PANEL CENTER SUB-ASSEMBLY (See page IP-56)

54. INSTALL COMBINATION METER ASSEMBLY (See page ME-140)

55. INSTALL INSTRUMENT CLUSTER FINISH PANEL (See page ME-140)

56. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (See page ME-141)

57. INSTALL INSTRUMENT PANEL FINISH PANEL END LH (See page ME-141)

58. INSTALL INSTRUMENT PANEL FINISH PANEL LOWER CENTER (See page ME-142)

59. CONNECT HEATER WATER INLET HOSE (See page AC-108)

60. CONNECT HEATER WATER OUTLET HOSE (See page AC-108)

61. INSTALL LIQUID TUBE SUB-ASSEMBLY (See page AC-108)

62. INSTALL SUCTION TUBE SUB-ASSEMBLY (See page AC-109)

63. ADD ENGINE COOLANT (for 1NZ-FE) (See page CO-8)

64. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

65. CHECK SRS WARNING LIGHT

(See page AC-109)

66. CHARGE REFRIGERANT (See page AC-67)

67. WARM UP ENGINE (See page AC-69)

68. CHECK FOR ENGINE COOLANT LEAK (for 1NZ-FE) (See page CO-1)

69. CHECK FOR REFRIGERANT LEAK (See page AC-69)

70. POSITION FRONT WHEELS FACING STRAIGHT AHEAD

71. PERFORM CALIBRATION OF TORQUE SENSOR ZERO POINT (See page SR-22)

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment