Yaris Manual Shift Cable

1. INSTALL FLOOR SHIFT SHIFT LEVER ASSEMBLY

(a) Install the shift lever with the 4 bolts. Torque: 12 N*m (122 kgf*cm, 8.9 ft.*lbf)

Protruding Portion —Lock

Protruding Portion —Lock

CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

(a) Install the control shift cable onto the shift lever retainer.

NOTICE:

• Install the cable with the protruding portion of the cable outer facing upward.

• After installing, check that the lock of the cable outer is protruding beyond portion A, as shown in the illustration.

Connect the control shift cable to the shift lever.

Protruding Portion

Protruding Portion

Cover

Lock Piece

Adjuster Case

[tel

Install the control select cable onto the shift lever retainer.

NOTICE:

• Install the cable with the protruding portion of the cable outer facing upward.

• After installing, check that the lock of the cable outer is protruding beyond portion A, as shown in the illustration.

Connect the control select cable to the shift lever.

NOTICE:

• Connect the control select cable so that the adjusting mechanism lock of the control select cable is installed on the left side of the vehicle.

• Insert the clip in the direction shown in the illustration.

(e) Adjust the length of the control select cable.

(1) Slide the adjuster case cover in the direction shown in the illustration (Illustration A).

(2) Gently pull the cable rod toward the rear of the vehicle by hand to pull the cable taut.

(3) Press the lock piece into the adjuster case and lock it (Illustration B).

(4) Slide the cover in the direction shown in the illustration (Illustration C).

NOTICE:

Slide the cover past the protrusion of the lock piece (Illustration D).

3. INSTALL CONSOLE BOX ASSEMBLY REAR (for Hatchback) (See page IP-79)

4. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Hatchback) (See page IP-80)

5. INSTALL REAR CONSOLE BOX ASSEMBLY (for Sedan) (See page IP-88)

6. INSTALL CONSOLE BOX CARPET (for Sedan) (See page IP-88)

7. INSTALL CONSOLE UPPER REAR PANEL SUBASSEMBLY (for Sedan) (See page IP-89)

8. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for Sedan) (See page IP-89)

9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Sedan) (See page IP-89)

10. INSTALL INSTRUMENT PANEL FINISH PANEL LOWER CENTER (for Sedan) (See page ME-142)

TRANSMISSION CONTROL CABLE COMPONENTS

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Responses

  • domenico
    How to adjust selector cable on vizts?
    12 months ago

Post a comment