Installation

1. INSTALL REAR BRAKE DRUM SUB-ASSEMBLY

ADJUST REAR DRUM BRAKE SHOE CLEARANCE

(a) Provisionally install the 2 hub nuts.

(b) Remove the hole plug, and turn the adjuster to expand the shoe until the drum locks.

(c) Using a screwdriver, release the adjuster 12 notches.

(d) Install the hole plug.

FILL RESERVOIR WITH BRAKE FLUID (See page BR-10)

BLEED MASTER CYLINDER (See page BR-10)

BLEED BRAKE LINE (See page BR-12)

CHECK FLUID LEVEL IN RESERVOIR (See page BR-12)

CHECK FOR BRAKE FLUID LEAKAGE

INSTALL REAR WHEEL Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)

9. INSPECT PARKING BRAKE LEVER TRAVEL (See page PB-1)

10. ADJUST PARKING BRAKE LEVER TRAVEL (See page PB-2)

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment