Installation

1. INSTALL REAR BRAKE FLEXIBLE HOSE

(a) Install the flexible hose with the 2 new clips onto the axle beam.

(b) Using SST, install the 2 brake tubes onto the flexible hose.

SST 09023-00100 Torque: for use without SST

for use with SST

HINT:

• Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).

• This torque value is effective when SST is parallel to a torque wrench.

FILL RESERVOIR WITH BRAKE FLUID (See page BR-10)

BLEED MASTER CYLINDER (See page BR-10)

BLEED BRAKE LINE (See page BR-12)

CHECK FLUID LEVEL IN RESERVOIR (See page BR-12)

CHECK FOR BRAKE FLUID LEAKAGE

INSTALL REAR WHEEL Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)

BRAKE - PROPORTIONING VALVE

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment