Installation

1. INSTALL FRONT BRAKE FLEXIBLE HOSE

(a) Install the flexible hose with the union bolt and a new gasket.

HINT:

Install the flexible hose lock securely into the lock hole in the disc brake cylinder.

(1) Install the flexible hose and speed sensor with the bolt.

Install the flexible hose and speed sensor without twisting them.

(1) Install the flexible hose with the bolt. Torque: 29 N*m (300 kgf*cm, 22 ft.*lbf) NOTICE:

Install the flexible hose without twisting it.

(e) Using SST, install the brake tube. SST 09023-00100

Torque: for use without SST

for use with SST

HINT:

• Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).

• This torque value is effective when SST is parallel to a torque wrench.

2. FILL RESERVOIR WITH BRAKE FLUID (See page BR-10)

3. BLEED MASTER CYLINDER (See page BR-10)

4. BLEED BRAKE LINE (See page BR-12)

5. CHECK FLUID LEVEL IN RESERVOIR (See page BR-12)

6. CHECK FOR BRAKE FLUID LEAKAGE

7. INSTALL FRONT WHEEL

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment